TUTORIALS

1. Click the thermometer button once to turn it on

2. Allow Bluetooth to connect - the app will tell you when pairing is complete

3. Put the thermometer in your pet’s armpit

4. Click the button one more time to start measuring

5. Watch the temperature go up on the app - the measurement should be done in 10-15 seconds

• Use Mella on any of the pet's 4 legs!

• From a standing perspective, place the thermometer parallel to the leg and up into the armpit

• There is no need to apply additional pressure, although it is helpful for the pet's leg to be closed

Bluetooth Required

When prompted, please select ‘Allow’ for the Mella App to use to the Bluetooth of your phone. Your Bluetooth must be enabled for your Mella Home to connect.

The default when you turn on the thermometer is the rectal reading as you will see that there's an R on the digital display of the thermometer.

Click the thermometer button twice until this R turns to an A. This change will reflect in the app and will be the axillary setting.

The device is water resistant, but cannot be submerged. Most sterilizing wipes or spray cleaners are effective in cleaning the thermometer. If you need to cool down Mella try waving it in the air or wiping the tip with a cool damp washcloth.

1. From the "Home" screen select your thermometer

2. Click on the settings icon on the top right corner

3. Select “Basic Settings”

4. Scroll down to "Action Beep" and turn the toggle off

5. Click "Save" to save the changes.

1. Click the "+" button

2. Turn on Tabby

3. When prompted select to connect Tabby

4. If you'd like to rename the device and assign an exam room you can do so. Then click "Finish"

5. Select a pet to start measuring

Please note that a Mella base needs to be connected to your desktop.

Insert the end of the tape measure into the buckle until you hear a click. Press the button to release the buckle.

To retract the tape, press and hold the retract button until it has fully retracted.

Once your Tabby is paired to your device you can toggle to the next measurement by pressing the "M" button on your Tabby.

The device is water resistant, but cannot be submerged. Most sterilizing wipes or spray cleaners are effective in cleaning the tape measure.